6 bang-for-your-buck TFT Display Module

For use with a Raspberry Pi 4B, 3B+, or 3B Jetson Nano, ELECROW's 10.1-inch 1920 x 1080 portable monitor with an IPS gaming screen and VGA HDMI compatibility is available.

Price: $119.99

Excellent Picture Quality --- This 10.1" monitor features a lovely 1920x1080 resolution screen, and the picture is clean and crisp, providing an outstanding viewing experience. A red "10" on the screen is a mark on the protective film that can be removed, so take note. Lightweight and Portable -- The micro monitor is incredibly portable due to its small size and light weight. It is the ideal mobile monitor for confined situations. Display connections are recessed on the side, making setup simple and helping to conceal cables. Standard 75x75mm VESA mount holes with a 4mm depth are located on the back. If you decide to place it on a rack, you will require M3 bolts, which are not provided in the package.

128x128 color TFT LCD display module for the 5110/3310 from Walfront, 1.44 LCD display module with PCB. TFT LCD screen.

HIGH QUALITY MATERIAL IS 100% NEW AND BRAND NEW TO ENSURE LONGER USE A LARGE DISPLAY WITH HIGH RESOLUTION OFFERS CONVENIENT READING --This 1.44-inch LCD module's 128x128 resolution is driven by a ST7735 drive chip. CONCEIVED USING THE SPI SERIAL MODULE A 1.44-inch screen with an SPI serial module and a minimum of four IO-driven 128 * 128 pixels provides EASY OPERATION. REPLACEMENT PERFECT Colorful Display: The ideal update for Nokia 5110/3310's black-and-white LCD screen to full color. COMPLETE WITH PCB PLATE—The PCB plate is included with this TFT LCD display module.

TFT Display Module, Support Analog SPI and Hardware SPI, TFT LCD Display Color Display Module for ST7735 128x160 51/AVR/STM32/ARM 8/16 bit, 1.8 inch SPI TFT LCD Display Module

This 1.8-inch serial SPI color display module is intended for use on development boards by electronics amateurs. The TFT LCD display module supports both hardware and analog SPI. Less I/O port requirement with SPI serial port. ST7735 driver IC, 4-wire SPI interface, and 128x160 resolution. SUITABLE FOR: Compatible display modules can be driven by the 8051, AVR, PIC, ARM, or STM32. DESIGNED WITH: An SD card slot and LCD PCB adaptor are included in the design of this TFT LCD screen. 4 IO: At least four IOs can be used to drive this color display module. The card slot makes function extension easy.China lcd 240x128 for sale

AVR/STM32/ARM/1.8 inch SPI TFT LCD Display Module for ST7735 128x160

Price: $9.99

1.8-inch serial SPI color display module, brand-new. Support hardware SPI and analog SPI. fewer I/O ports required with SPI serial designed with a single SD card connection and an LCD PCB adapter The LCD display module can be controlled by the 8051, AVR, PIC, ARM, or STM32. The LCD display for 4D systems can be driven by at least four IO.

Walfront LCD Display Module, 3.2-inch 240x320-pixel TFT LCD Display Module with a card cage, TFT Display Module

Price: $20.34

A 3.2-inch color screen that supports 65K color display and has a large color LCD display module for clear and colorful reading. A 3.2-inch color screen that supports 65K color display and has a large color LCD display module for clear and colorful reading. 320x240 HD resolution, optional touch feature, HIGH RESOLUTION FOR CONVENIENT READING EASY OPERATION IS PROVIDED BY ADOPT WITH SERIAL PERIPHERAL INTERFACE--Using the Serial Peripheral Interface serial bus, the display may be made lighter with just a few IO. Equipped with a card for convenient experiment expansion, an SD card cage is provided for this.

128x128 3.3V RGB 4 Wire SPI ST7735 1.44" TFT Display Screen

Price: $8.99

Resolution of the 1.44-inch tFT display is 128 x 128. Communication interface for the 1.44" TFT LCD display module is SPI, and the driver is ST7735. Because it has a 3.3 volt screen, a 5 volt device cannot use it without resistors. Four 560 Ohm, 680 Ohm, or 1 k Ohm resistors are required for the data lines SCK, SDA, AO, and CS if you're using a 5 volt microcontroller.

1