How to choose lamps at home? Do not buy, according to these points to choose the right!

The first point 

First of all, it is important that if you buy the lights must be anti-flash, if not anti-flash lights, be sure not to buy, because this does not put the strobe light is more hurt eyes, children myopia is not only because of watching mobile phones, watching TV and other electronic devices caused by, so in the purchase of the lights, the first sentence should be asked to clarify the merchant, he is this light anti anti-flash, the installation of the ah, but also can be used with a mobile aluminum extrusion cnc phone to the lights to verify the filming! A little, will not flash if there is no problem. This article, to give you a few key words, especially Led lamps and lanterns, the main points of purchase: no stroboscopic, blue national standard, colour rendering index greater than 90.

Point 2

Appearance of very complex lamps, it is recommended not to buy, for three reasons, difficult to take care of, easy to outdated, the price is not cheap, so it is recommended that you choose a modeling the simpler the lamps on the line, cheap and good with, even if you don't like it if you change one is not heartbreaking.

The third point 

Lamp material selection ah, recommended to choose aluminium, or acrylic can be, iron lamps and lanterns is the most afraid of rust problem, which depends on the lamps and lanterns manufacturers in the surface treatment, generally cheap iron lamps and lanterns, I have not seen the surface treatment is particularly ideal. In addition, if the budget is high, you can choose copper.

Point 4

Lamps colour temperature, here to focus on, colour temperature extrusion profiles is simply that it is the higher the value, the colour is more cold white, the lower the value it is, the colour is more warm yellow, a lot of selling sellers ah, he felt the trouble, or their own lamp body "quality" is not high, he will not give you to talk about the value of this colour temperature, simply tell you, it is a cold light or a warm light. A cold light or a warm light.

But the colour temperature, each space in our home is very critical, and each space has a suitable colour temperature, such as the bedroom, it is suitable for a colour temperature of 3000k, soft light, there is a sense of atmosphere want to sleep. Living room, choose 3500K or 4000K, can make our space look fresh and bright. Dining room, it is recommended to choose 3500K. Kitchen, choose 4000K, after all, our natural light ah, see more clearly, irradiated objects, relatively real.

Fifth point

Colour rendering index, just mentioned above, must be greater than 90, you go to the building materials market to see this furniture, you will find them in the showroom, the colour is very beautiful, but to their own home is not the same. The root cause is because of the colour rendering index, so again, the colour rendering index must be selected RA greater v slot extrusion than 90.

Sixth point

Is the weight of the lamps and lanterns, is that you need to look down, your home to install the ceiling can withstand the lamps and lanterns of a weight, if your lamps and lanterns are very heavy, then the ceiling, you need to let the carpenter in advance to do a good job of fixing the board.

9