10 affordable Gas drying unit in 2024

Health Cup Rich in Hydrogen Alkaline Ionizer Generator Weak Alkaline Cup Anti-Oxidation and Anti-Aging Glass Health Cup USB Rechargeable Electrolysis Generator

Price: $46.99

Improve water quality quickly using a hydrogen water bottle.

Electrolysis takes place quickly, and the parameters are more stable (but you must remember to add mineral water; clean water cannot be electrolyzed).

effectively address the issue of leftover oxygen and hydrogen after electrolysis, improving the quality and safety of drinking water.

"Hydrogen Water - a healthier life": The hydrogen water bottle can be pressure-proof, anti-fatigue, boost immunity, enhance memory, be used for facial care, promote sleep, and improve the quality of water.

The premium water bottle contains bio minerals, which when combined with water, react favorably to produce hydrogen-rich gas.

Your water will be clearer and more energizing as a result.

Easy and secure: Hydrogen water maker Fast operation with only one button, USB rechargeable, more cost-effective than hydrogen-infused water or h2 water.

Made without any dangerous chemical substances from food-grade borosilicate glass and rubber.

This ionized water bottle is simple and practical for work, travel, and the office.

It may be used approximately 20 times between charges.

Simple and stylish design: H2-rich cup with cup lid buckle for improved sealing and ease of use; its base has an EVE pad for stability and non-slip properties.

Good after-sales service: We extensively test all of our items before they are shipped, so you can buy with confidence.

Please get in touch with us if you have any inquiries so that we can give you the best service possible.

40g/h Air mode and 500mg/h Water mode on the JOBYNA Ozone Generator Commercial/Industrial/Home Ozone Ionizer & Deodorizer, High Capacity Ozone Machine for Factory, Mall, Basement, Office

Ozone output: JOBYNA high-capacity ozone generators can clean and deodorize a 7500 square foot space while producing 40,000 mg of ozone per hour.

The air mode, which uses two sets of ozone modules to create a total of 40g/h of ozone, is appropriate for big settings.

By setting the timers to the same duration, you can access either one or both modules.

Over the timer, an indicator light turns on when the machine is operating.

Tube Mode has an integrated independent booster pump and ozone module (0.5g/h), as well as a timer that you may use to configure the necessary duration based on your requirements.

Additionally, tube mode, which is ideal for the cab, long-distance water mode, and tiny places, employs 5 meters of food-grade silicone tube to assure the amount of ozone.

The standby time can be up to 120 minutes with the "Two Hours Timer" set to the proper moment to begin working.

The timer can be adjusted to "Hold" as well.

When in this mode, the ozone generator won't stop running unless you manually stop the timer.

Adopt a beautiful stainless steel shell that is strong and long-lasting.

It also has a foldable handle that makes it easy for you to take along.

Perfect for the office, farm, warehouse, bar, garage, and basement.

All ozone generators must only be used in places that are vacant.

30 minutes after the ozone machine has finished operating, the area must remain unoccupied by people or animals.

Caterpillar CAT C13 C15 C18 C3.6 C4.4 Engine 317 320 Excavator: 539-0118 NOx Sensor 5390118 Nitrogen Oxide Sensor Replacement

Price: $84.99

The OEM part numbers are 539-0118 and 5390118.

This product does not come with any instructions.

It is highly recommended to have the installation done by professionals.

【Fitment】- Compatible with Ea-rthmoving Com-pactor 825K 826K 836K / Compatible with Wh-eel-Type Loa-der 910 914 920 926M 930M 938M 950 GC 950M 950M Z 962M 966M 962M Z 966M XE 972M 972M XE 982XE 980 980XE 982 986K 988K 988K XE / Compatible with Gen-erator LC31XX.

See the details below for further information.

【Symptoms】: A number of symptoms suggest that your sensor might be broken.

#1 Verify the engine light #2 Excessive fuel consumption / #3 Engine misfiring and accumulation of soot / #4 The car jerks when it accelerates #5 Unstable idle and stalling engine?

【Feature】: Excellent performance, longevity, stable characteristics, high reliability.

Please don't hesitate to get in touch with us if you have any questions about whether this product will work with your model; we'll respond right away.

Weonefit offers a one-year warranty.

If, within the warranty period, you are unhappy with the product, we will be happy to exchange it for another item or give you a refund, depending on your preference.

The CO 21134C air conditioning compressor is compatible with the Cadillac Catera 3.0L, Chevrolet Optra 2.0L, and Daewoo Nubira 2.0L from 1997 to 2007.

Price: $143.89

Excellent Materials: Oil materials give AC compressors more stiffness and longer service lives.

Reduced engine load due to low output power at high speeds Forced Cooling: The compressor in the air conditioner is the main component that controls the temperature within the car's refrigeration system.

The heat in the automobile can be relieved with a high-quality compressor, letting you enjoy the journey.

Original Installation: The AC compressor with clutch adheres closely to the dimensions specified by the factory, making it easy to install and widely applicable.

Appropriate Cars: Air Conditioning Compressor Reference Number: CO 21134C.

Fits: 1997-2001 Cadillac Catera 3.0L, 2004-2007 Chevy Optra 2.0L, and 2000-2002 Daewoo Nubira 2.0L.

OCPTY CO 10539C Air Conditioning Compressor for 2.0L Chevrolet Optra, 2.0L Suzuki Forenza, and 2.0L Suzuki Reno (2004) to 2008

Price: $161.24

Superior Materials: To boost stiffness and prolong lifespan, oil-based materials are used in AC compressors.

Reduced engine load due to low output power at high speeds 2.

Forced Cooling: The car's refrigeration system, which controls the inside temperature, is powered by the ac compressor pump.

The heat in the automobile can be relieved with a high-quality compressor, letting you enjoy the journey.

3‿ Initial Installation: AC compressor with clutch adheres closely to the original factory dimensions, offering broad suitability and simplicity of installation.

Fourth, Appropriate Cars: Fits models of air conditioners: 2004–2007 Fit for the 2004–2008 Chevrolet Optra 2.0L Compatible with Suzuki Forenza 2.0L (2005–2008) Fits the 2.0L Suzuki Reno 5.

Compressor Reference Number for Air Conditioner: CO 10539C 2011146 2011559R 97272.

Internal Oil Content: 130ml; Pulley Grooves: 6.

High-Pressure Nitrogen Regulator, Single-Stage Large Pressure Reducer (0–1400 PSI)

Price: $90.99
wholesale CO2 recovery units

-Features: The regulator's body is made of forged brass.

A sintered inlet filter, a built-in pressure overload automatic degassing device, and a single stage type regulator are included.

A rubber bumper shields the regulator.

Pressure may be easily changed by hand thanks to a big T adjustment handle.

For improved accuracy at higher pressure settings, delivery gauges are constantly overscaled.

-ParameterPressure ranges for the CGA-580 inlet are 0–4000 psi (27 MPa); for the 7/16"-20 outlet, the ranges are 0–1400 psi (9.6 MPa); units of measurement are kPa and psi.

"-Accommodates inert gases such as nitrogen, argon, helium, and CO2 (requiring a UNIWELD-F36 adapter and a CO2 cylinder (CGA320) in order to connect to a nitrogen regulator (CGA580).

- Wide Application: Made for demanding uses requiring high output pressure.

For example, cleaning and inspecting air conditioners, refrigerators, and other heavy-duty applications requiring high outlet pressure.

Range of the safety output pressure: 0-850 psi.

ECROUATY Seal Kit for Hydraulic Log Splitter Cylinder Rebuild

Seal Size: ECROUATY Hydraulic Log Splitter Seal Kit for Cylinder Rebuild fitted specifically with 4.5" bore (I.

D.) x 1.75" rod (O.

D.) rod cylinders.

Prior to purchasing, kindly confirm that the outward diameter (O.

D.) and internal diameter (I.

D.) match the dimensions of your hydraulic cylinder.

FINANCIALLY EFFECTIVE: With the ECROUATY Splitter Rebuild Seal Kit, log splitter performance can be increased.

This kit guarantees a simple rebuild, avoiding damage and oil leaks, and is made specifically for 4.5" bore x 1.75" rod cylinders.

Increase the lifespan of your log splitter right now.

GOOD SEAL WITH NO LEAKS: built with premium-grade materials for improved leak-proof sealing performance.

high tensile strength and resistance to abrasion.

No burrs, a smooth surface, improved fit, and long-lasting, dependable use without distortion Safe and Quick Installation: Our flexible rod seal toolkit is a dependable and quick tool for our hydraulic seal installer.

With three sizes, it can handle a variety of rod seal installation tasks, ranging from 0.87 inches and higher.

Flexible Uses: Appropriate for a range of applications, such as hydraulic cylinders for automobiles and maritime use, inner seals for bucket cylinders, flexible rod seals for automobiles and ships, loaders, backhoes, skid steers, and more.

Superior Manual DC Generator with High/Low Output Switch - Ideal for STEM Projects Needing up to 15V DC Power

Price: $19.99

A great option for STEM experiments requiring up to 15V DC current is the Deluxe Hand Crank DC Generator with a High/Low Output Switch.

For teachers and students alike, this generator is a convenient and lightweight option.

Convenient Low and High Output switch that permits power limitation and guards against overcurrent damage to LEDs and lightbulbs is another feature of the Deluxe Hand Crank DC Generator.

High-performance POM plastic gears that offer remarkable strength, low friction, and outstanding stability are a feature of the Deluxe Hand Crank DC Generator.

This generator is a durable and dependable instrument for laboratory or classroom investigations because of its gears, which guarantee smooth and steady functioning.

Batteries in electronics and experiments can be replaced by the versatile and sustained DC power output provided by the Deluxe Hand Crank DC Generator.

It's a fantastic tool for practical learning in the classroom or lab because of its durability and accurate power management.

Easy-to-use connection clips, a clear plastic shell, and 36" long leads make the Deluxe Hand Crank DC Generator a user-friendly tool for STEM projects.

FM2026-KIT Hakko

Nitrogen soldering system kit, FM2026-01 + FX791-01 kit ideal for applications requiring lead-free hand soldering The FM2026-KIT contains only the FM791-01 controller and FM2026-01 iron.

The FX-781 N2 Generator and the FX-780 are not included and need to be bought individually.

Gas Hose CGA580 Welder with ZISS CO2 Argon Regulator

Price: $26.99

For professional TIG/MIG welding operations, the Ziss Argon Regulator is a great option for reducing and controlling pressure levels.

It can also be used with CO2 for welding.

Pressure gauge-equipped Argon Flowmeter: This argon flowmeter lets you see how much gas is left in the tank between 0 and 4000psi.

Ziss pressure regulators that are compatible with normal Argon/O2/N2 tanks have an inlet connection of CGA-580.

The female 5/8UNF-18RH fitting can be used to connect the welding hose.

Ziss 10-foot Quick-connect hose is included.

Keeping your tanks safely away from your welding jobs is made possible by fitting.

Application Area: Electronics, welding, cutting, and chemical industries

2024 Eco-friendly China wholesale PSA oxygen generators

9 must-have China wholesale Gas drying unit supplier in 2024

1