
Even though the slot is same and some motherboards do support both, none of Crucial's mSATA drives will work in a PCIe®-only slot or motherboard.
If you are able to correctly put the SSDs in their designated locations on your motherboard, you can utilize both M. 2 and SATA SSDs at the same time. Enable the Bios by going to the settings. Select the installed SSD in Windows disk management by going there.
The majority of modern motherboards will provide you complete support for NVMe SSDs. However, complications might arise with older motherboards and chipsets, especially if you attempt to make your NVMe the boot drive.
Just the Dell 4200/6400/6500 and a few Lenovo laptops, including the y460/y560/y470/y570, e220/e420, and k26, presently have msata. There are mini-pcie SSD drives, however they don't provide any performance advantages over platter-based hard drives.
Go to Task Manager > Performance > Disk in Windows 10. Your HDD or SSD's model number will be listed at the top. You may find additional information about the drive by searching for the model name.
To access the BIOS Setup menu at the Sun logo screen, press the F2 key. IDE Configuration can be found under Advanced in the BIOS Utility dialog. It shows the IDE Configuration menu. Select Configure SATA as from the IDE Configuration option, then press Enter.
If you don't have it, you can find it on the manufacturer's website. You will need to search for and obtain the specifications for your specific laptop model. You can also look for the M. 2 or nVME slot, which can be an A or B M, by opening the memory door on the bottom of the laptop.
Switch from a hard disk to an SSD. The single biggest hardware improvement you can make to speed up a laptop is to add a solid-state drive (SSD). When compared to conventional hard drives, it makes everything faster; starting up, closing down, and launching apps all happen in a flash of an eye.
Purchase a hard drive caddy that may be fitted in an optical bay if you wish to use an SSD in a laptop. Install the OS on the ssd and observe the difference. If you're using a desktop computer, you can quickly add a second hard drive, set it as the primary in the boot menu, and install the operating system.
Just be careful not to shake your system. Then, in the HD bay, you can install a SATA III (6.0 Gb/s) SSD. However, you should leave the HDD in the HD bay if you want to use your system on a laptop or if you plan to move it about a lot. Perhaps you should invest in a better HD like the Seagate FireCuda SSHD.
1